TEST PRODUCT evak

The Evak Residox 400 is ideal for emergency flooding where you need to pump water completely away, the rubber suction base allows you to pump down as low as 1mm on flat surfaces.

The Residox 400 has a high resistance to abrasive liquids making it suitable for applications including site drainage, public works, flooding and removing any residual water, the abrasion resistant Hytrel vortex impeller reduces wear and maintains reliability.

The Evak Residox features a stainless steel outer case and handle, with NBR (rubber) suction base, internally the pump has a cast iron pump housing and alloy motor housing and seal casing.

The Residox 400 is suitable for continuous running and comes in 230v or 110v, with a 10 metre H07RN-F cable. The two inch top discharge provides a maximum flow rate of 250 litres per minute, and a maximum head of 11m

Maximum flow 250 litres per minute, maximum head 11 metres
Nominal 400W (0.5HP) / 110V = 6 Amp / 230V = 3 Amp
Suitable for use with abrasive liquids
Free passage 2mm
Stainless steel construction and abrasion resistant impeller
Double mechanical seal in oil chamber – SIC/SIC
Auto reset thermal protector
Internal capacitor
10 metre H07RN-F cable as standard
Discharge 2 inch hose tail
Weight only 13Kg

Nominal 400W (0.5HP)
2850 RPM
110V = 6Amp – 230V = 3Amp
Double mechanical seal in oil chamber – SIC/SIC
Auto reset thermal protector
Internal capacitor
10 metre H07RN-F cable as standard
Discharge 2 inch Hosetail
Weight only 12 Kg.

Click here to download the product’s datasheet